End Driven Machines

End Driven Machines

End Driven Machines

  • Krystal DynamicBalancing Machines are designed and developed after years of experience in this field. All models are manufactured under strict quality control at all manufacturing stages.
  • All these models are suitable for Balancing variety of components as well as for production balancing.
  • All types of components, i.e.Armatures, Crankshafts, Fans, Flywheels and all such rotating components can be balanced on these machines with properly designed balancing Fixtures.
  • These machines can be equipped with variety of measuring systems suitable for the application and depending on sophistication level required.
  • All Krystal make Balancing Machines meet relevant National and International standards like BIS, ISO etc.

  • FEATURES :
  • Safety and Ease of handling
  • Driven Methods which Meet your Requirements.
  • Appropriate Electronic Unit for every Balancing problems
  • Suitable Type of Readout System for Every Accuracy Requirement.



• All KE Balancing machines are calibrated as per ISO 2953 - 1985 / BS 3852 - part -I - 1979 •

Technical Data KHB - Series :
Models Unite KHB - 10 KHB -30 KHB-50 KHB-100 KHB-300 KHB - 650 KHB - 1T KHB - 2T KHB - 3T KHB - 7T KHB - 10T KHB - 20T
Weight of Job kg 0.5 - 10 1-30 2-50 3-100 10-300 6.5-650 10-1000 20-2000 30-3000 70 - 7000 100 - 10000 200 - 20000
Max. diameter of job mm 500 500 500 1000 1000 1200 1600 1800 2000 2400 2400 3000
maximum distance measured from coupling end to exteme bearing center mm 500 500 1200 1400 1400 1400 1650 1650 2400 3300 3300 5000
Minimum distance between bearing mm 50 75 75 90 110 200 350 350 500 560 560 660
Journal diameter mm 5-50 5 - 50 5 - 50 15 -80 20 - 120 20 - 120 25 - 140 30 - 160 35 - 200 55 - 300 55 - 300 70 - 350
Balancing speed of machine RPM 1200 700 700 600 500 350 - 700 300 - 600 250 - 500 250 - 500 200- 400 200 - 400 180 - 360
Drive motor HP 0.33 0.75 0.75 1.5 3 5 7.5 10 20 30 40 60
Acceleration capability (GD²n²) Kgm²n² 0.29 X 106 0.37 x 106 0.37 x 106 0.88 x 106 3.9 x 106 8.5 x 106 14.12 x 106 44 x 106 88 x 106 168 x 106 216 x 106 400 x 106
Minimum unbalance mass read gm 0.01 0.1 0.1 0.1 0.2 0.1 0.2 0.2 0.4 1 1 2
Maximum unbalance mass measured gm.mm 104 3 x 104 5 x 104 105 3 x 105 6.5 x 105 106 2 x 106 3 x 106 7.0 x 106 107 2 x 107
Minimum unbalance measured and microprocessor based models gm.mm 0.5 1.25 2.5 5 15 5 10 10 20 60 60 160
Minimum achievable unbalance (For maximum weight of rotor) microns or gm.mm 
./kg
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5






End driven models are also available in computerised version with following salient features

Technical Specifications :
Models Unite KHB - 10 KHB -30 KHB-50 KHB-100 KHB-300 KHB - 650 KHB - 1T KHB - 2T KHB - 3T KHB - 7T KHB - 10T KHB - 20T
Weight of Job kg 0.5 - 10 1-30 2-50 3-100 10-300 6.5-650 10-1000 20-2000 30-3000 70 - 7000 100 - 10000 200 - 20000
Max. diameter of job mm 500 500 500 1000 1000 1200 1600 1800 2000 2400 2400 3000
maximum distance measured from coupling end to exteme bearing center mm 500 500 1200 1400 1400 1400 1650 1650 2400 3300 3300 5000
Minimum distance between bearing mm 50 75 75 100 100 150 350 350 500 560 560 660
Journal diameter mm 5-50 5 - 50 5 - 50 15 -80 20 - 120 20 - 120 25 - 140 30 - 160 35 - 200 55 - 300 55 - 300 70 - 350
Balancing speed RPM 1200 700 700 600 500 350 - 700 300 - 600 250 - 500 250 - 500 200- 400 200 - 400 180 - 360
Drive motor HP 0.33 0.75 0.75 1.5 3 5 7.5 10 20 30 40 60
Acceleration capability (GD²n²) Kgm²n² 0.29 X 106 0.37 x 106 0.37 x 106 0.88 x 106 3.9 x 106 8.5 x 106 14.12 x 106 44 x 106 88 x 106 168 x 106 216 x 106 400 x 106
Minimum unbalance mass read gm 0.01 0.1 0.1 0.1 0.2 0.1 0.2 0.2 0.4 1 1 2
Maximum unbalance mass measured gm.mm 104 3 x 104 5 x 104 105 3 x 105 6.5 x 105 106 2 x 106 3 x 106 7.0 x 106 107 2 x 107
Minimum unbalance measured gm.mm 0.5 1.25 2.5 5 15 5 10 10 20 60 60 160
Minimum achievable unbalance (For maximum weight of rotor) microns or gm.mm 
./kg
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5